殿上欢,盗墓笔记txt全集下载

Walltec walls offer lower initial as well as long-term costs when compared with other materials due to low product costs, elimination of plaster, no curing, no zari- work for conduiting, no lintels, no stone sills, no maintenance, no flaking/cracks, increased carpet area as well as flexibility to move partition walls when required.
Lighter weight of the walls allows for lower deadweight thus reducing structural steel costs.

Walltec walls are factory made, transported to the site ready to install on pallets and manually erected on concrete floors. Highly versatile and fast to install, requiring just two regular construction workers to install up to 6 m2 per hour and are pre- cured thus do not require any curing. Can be cut, sawn and dimensioned as per requirement for installation at site.
Projects utilizing Walltec walls can save weeks or months over other materials due to no prep work, fast installation, no curing time requirement and time saving with plumbing, electrical and HVAC conduiting.

On account of their factory finish they are aesthetically pleasing.Due to its availability in different heights and thicknesses with no load-bearing application it provides total design flexibility.
More carpet area due to lower thickness of 68mm to 140mm instead of brick partitions of 150mm with plaster on both sides.
No lintels need to be cast as panels can be place horizontally as lintels where required.
Due to its consistent line, length and levels Walltec walls do not require stone or wood sills/frames to level surfaces for windows and openings.
Hanging wash-basins, cup-boards, mirrors, paintings with regular plug screws possible and can take as much as 350kg of load. Drilling, Nailing, Hammering as in any normal brick-plaster wall.
Good workability, Less mess in installation, no curing, minimum waste at site and quick installation contribute to better site management.

No problems like leaching of salts from bricks over time. No cracking, flaking of plaster due to one homogeneous material. No plastering means additional saving on time, quality, maintenance etc.

Strength gradually increases over time with an initial cube compressive strength of 25 to 40 N/mm2 and an initial sectional compressive strength of 18 to 30 N/ mm2.
Walls do not deteriorate, experience creep and stress relaxation, lose strength and/or deflect over time.

Provides excellent protection against impacts from intrusion, slamming, explosions, vehicles and projectiles.
High fire ratings of upto 2 hours.
Sound insulation of 46 – 50 dB
Have passed tornado/hurricane/heavyrain-sleet-hail impact testing,giving owners an added level of safety assurance in areas prone to severe weather.

Because precast concrete products are typically produced in a controlled plant environment, they exhibit high quality and uniformity.
Problems affecting quality typically found on a job site – temperature, curing conditions, craftsmanship and material quality – are nearly eliminated in a plant environment.

No curing means massive water savings during construction.
Lower raw material used than with other partitions and all raw material composed of natural materials that are nontoxic and environmentally safe.
Lower raw material used than with other partitions and all raw material composed of natural materials that are nontoxic and environmentally safe.

Walltec walls do not degrade from exposure to sunlight and provide excellent thermal shielding due to the hollows acting as heat sinks. Provides Thermal resistance of 0.4 (m2K)/W and better.
Can use insulation between 2 walls for added thermal resistance. 2 – 68 mm Walltec Panels sandwich a 10mm thermocol sheet to provide a partition wall with excellent thermal resistance.

If you have any questions or need to talk with us then please send us an email to info@sdyzty.com

魯公網(wǎng)安備 37088202000031號(hào)